Self leveling concrete over plywood floor in NYC

    
A plywood sub-floor can be converted into a beautiful polished concrete floor using self leveling concrete, Param 5500. Recently, Mirage Studios of Valley Stream, NY resurfaced an existing wood floor with self leveling concrete on 19th floor of a building on 3rd Avenue in NYC.
 
Elevator Lobby - Before

Elevator Lobby - Before

Self leveling concrete over wood
Elevator Lobby – After

It took 5 days to complete the whole process. The first three days were full working days where as the last two days were partial working days because of the sealer application process. One coat of water based, low VOC- epoxy primer/sealer, Perdure E32 was applied and two coats of water based, low VOC-polyurethane top coat, Perdure U45 was applied to give better abrasion resistance.

The complete installation of Param 5500 along with coloring and sealing process is shown in the videos on This Page.

Please Contact Us to discuss your project involving installation of self-leveling concrete over plywood substrates. 

Receive Specials Offers & News from Duraamen.