Param 6000 | Self-Leveling Polishable Concrete for Concrete Substrates Self-leveling polishable concrete toppings are used to resurface concrete substrates that are in bad shape (cracks, spalling, pitted, out of level, etc.) to achieve a perfectly smooth, seamless polished concrete floor. The floors installed using Param 6000, polishable concrete overlay looks ultra-modern, minimalist design aesthetic with a short turnaround time. Param 6000 can be installed over any hard surface like terrazzo, ceramic, or porcelain tiles along with concrete. Polishable concrete overlay, Param 6000 can be seeded with aggregates or glass pieces to achieve exposed aggregate appearance. It can be also integrally colored with Colorfast Color packs and/or Deso Dyes. Key Features Cost-effective method to achieve polished concrete floorsSeamless Concrete FloorsVery low maintenanceSafe (slip-resistant finish)Zero VOCFast turn aroundContribute to LEED points Suggested Applications OfficesRetails StoresRestaurantsMeeting roomsMuseums / Art GalleriesLobby AreasCafeteriasLibrariesWarehousesLofts in High Rise ApartmentsLiving Rooms / Basements Products Included in this System Perdure E10Param 6000ColorfastDeso DyesHermetix DensifierHermetix ProtectorBroadcast sand Estimate 1000sq.ft. @ 1/2″ thickness Note that this estimate is based upon standard application rates and methods. On-site application rates may vary depending upon the site conditions and application methods. Primer Perdure E10 – 6.50 gallons30 mesh broadcast sand – 400 to 500lb Bodycoat Param 6000 – 80 bags Colorants (choose any one or two depending upon the desired color) Colorfast – 80 packsDeso Dye – 2 unit Sealers & Top coat Hermetix Densifier – 2 galHermetix Protector – 2 gal